is there a way to use the huion gt 190 without plugging it into a monitor port

Based on our understanding of the FCC rules, TYT should be able to ship the radios as long as their supported range is within what is allowed on the grant from the FCC. Great question, and one that we can't get a clear answer to. Prior versions will need special unlock software. The MD-UV380 requires version 18.03 or higher. The TYT MD-380 or MD-390 must be running firmware version 14.07 or higher to unlock using these steps. Unlocking the TYT MD-380, MD-390, and MD-UV380

Turn the radio ON while holding down these buttons.

On the side of the radio, hold down the top (blue) button and the UP arrow key.

The TYT MD-2017 must be running firmware version 4.06 or higher to unlock using these steps.

No notification/confirmation is provided, but the radio is now unlocked.

Power up the radio while holding these buttons until the power on tone sounds.

Hold down the P1 and P2 buttons on the front of the radio.

Note, you must remove vehicle or power supply power - you can't just turn off the radio with the power button. The TYT MD-9600 must be running firmware version 6.09 or higher to unlock using these steps. After being unlocked, the radio will work properly.Ī radio will always remember that it has been unlocked, even if the battery or power supply is removed. A locked radio that has been programmed to frequencies outside of the locked range does not need to be reprogrammed. Once unlocked, the radio will show the correct frequency. For example, if the channel on a locked radio is programmed for 147.300, the display will show 150.000. Radios that are locked will display frequencies outside of the 150-160 MHz and 450-460 MHz range as 150.000 or 450.000 when the radio is in frequency mode. In this article, we'll show how to unlock the TYT MD-9600 mobile radio, and the MD-380, MD-390, MD-UV380 and MD-2017 handheld radios. All of their models can now be unlocked by holding down a key combination while powering on the radios. With the most recent firmware release, however, TYT has made the unlock process much more simple. They actually made these changes a few months ago, and at first 'unlocking' the radios to allow use outside of these limited ranges required special unlock software. With the recent uncertainty surrounding the FCC and import radios, TYT has made a decision to ship all of their radios locked down to the 150-160 MHz VHF and 450-460 MHz UHF ranges.

Is there a way to use the huion gt 190 without plugging it into a monitor port